Home
About us
Product Catalog
Block making machine
cement roof tile machine
AAC block machine
AAC Panel and Block
Concrete pole machine
Concrete pipe machine
full automatic roof tile machine
Concrete mixer and Pump
Video
News
Contact Us

Concrete pole machine 

Prestressed reinforcement concrete pole machine,Electric cement pole machine

     The Prestressed Concrete  Pole machine system is used for concrete electrical pole manufacutring. Its mainly manufacture technology is longitudinal tension by steel wires. Then it can squeeze out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.
    In order to form the concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the mould-releasing cycle.
     Our factory produces two categories of Pre-stressed concrete electric pole moulds, DMZ&DMD. The Prestressed Electrical Poles manufactured by this series equipments comply with national standard of JC/T364-2001.

 

Technical parameter of prestressed concrete pole

Top diameter (mm)

wheel distance (mm)

Running wheel diameter (mm)

Length (m)

150

2000

600

7-12

170

2000

600

7-12

190

2000

650

7-15

230

2000

650

6-9

300 equal diameter

2000

600

6-9

350 equal diameter

2000

650

6-12

310

2000

650-780

6-15

 

Working Principle of   electric prestressed concrete pole making machine

1. Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.

2. Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.

3. The speed of separation is slow when the viscosity of slurry is high.

4. It is good for centrifugal sedimentation when the slurry density is different in each component.

Features of electric prestressed concrete pole making machine

1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).

2. Crack resistance can increase about 3~5 times.

3. Rigidity increases 1~3 times.

4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).

5. Good durability, can delay the existence and expansion of cracks.

6, Protect the environment on which human beings depend on for existence, and reduce the deforestation


Home  |  About us  |  Product Catalog  |  Block making machine  |  cement roof tile machine  |  AAC block machine  |  AAC Panel and Block  |  Concrete pole machine  |  Concrete pipe machine  |  full automatic roof tile machine  |  Concrete mixer and Pump  |  Video  |  News  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com